Siemens CFMS2015 Configuration page 22

Installing the camera
8
Viewing and listening
22
Siemens AG
1. Launch the browser.
2. Click "Tools" on Toolbar
3. Select "Internet options".
4. Select the "Connect" tab.
5. Click "LAN Setting."
The screen for setting a local area network (LAN) will appear.
If the checkbox "Will use a proxy server" is not marked:
The browser is not set to use a proxy server. Click "Cancel" and quit setting.
If the checkbox "Will use a proxy server" is marked:
1. Click "Detail setting."
A proxy setup screen will appear.
2. Enter the IP addresses of the network cameras in the fields marked "Do not
use the proxy server with addresses started with the following".
3. Click "OK."
When Windows XP SP2 is used: Click "Install" for "Active-X control."
All browsers except the IE can only be used for image viewing and compression
setting.
A proxy server protected by a firewall sometimes cannot be connected to the
network camera. Consult the network administrator to avoid impacts on network
camera operations.
Communication with the network cameras via a proxy server may cause prob-
lems. Install the network cameras after consulting with the network administrator.
If the network cameras are used in conjunction with a proxy server, it may take
some time for the images to be displayed after a login, or the frame rate of the de-
livered images may be reduced.
All browsers except the IE only support image viewing and compression setting.
A6V10334028
20.12.2011