Subwoofer Output; Tel Mute; Theft Deterrent Faceplate; Tuner Features (Ez700Sr) - Kenwood Ez700SR Instruction Manual

General features

Subwoofer Output

Turning the Subwoofer output ON or OFF.
Press the [SW] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it's ON, "Sub-W ON" is displayed.

TEL Mute

The audio system automatically mutes when a
call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio
system comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio
system comes back ON.
14
|
English

Theft Deterrent Faceplate

The faceplate of the unit can be detached and
taken with you, helping to deter theft.
Removing the Faceplate
1
Press the [OPEN] button.
Drop open the faceplate.
2
Drawing the faceplate to left side pull it to
the front and remove it.
• The faceplate is a precision piece of equipment and
can be damaged by shocks or jolts. For that reason,
keep the faceplate in its special storage case while
detached.
• Do not expose the faceplate or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possibility of
water splashing.
Reattaching the Faceplate
1
Align the shaft on the unit with the
depression on the faceplate.
2
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.
Function of the Ez700SR
Tuner features
SRC
OPEN
AUTO/AME
ST indicator
ST
ATT
Band display

Tuning

Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Select the band
Press the [FM] / [AM] button.
Each time the [FM] button is pressed it switches
between the FM1, FM2, and FM3 bands.
3
Tune up or down band
Turn the [4] / [¢] knob.
• During reception of stereo stations the "ST" indicator
is ON.
4/ ¢
AM FM
c.s.
1 - 6
Preset station number
TI DAB NEWS MP3 WMA
M P S
DIGITAL ANALOG RDS PTY
Frequency display

Tuning Mode

Choose the tuning mode.
Press the [AUTO] button.
Each time the button is pressed the Tuning
mode switches as shown below.
Tuning mode Display Operation
Auto seek "Auto 1" Automatic search for a station.
Preset station seek "Auto 2" Search in order of the stations
in the Preset memory.
Manual "Manual" Normal manual tuning control.
English
15
|