Table of Contents
Advertisement
Selecting the Source
Press the [SRC] button.
Source required
Tuner
CD
External disc (Optional accessory)
TV (Optional accessory)
Auxiliary input
Standby (Illumination only mode)
Volume
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator
turns ON or OFF.
When it's ON, "ATT ON" is displayed.
System Q
You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound
setting switches.
Sound setting
Flat
User memory
Rock
Pops
Easy
Top 40
Jazz
• User memory: The values set on the 'Audio Control'
Display
• Each setting value is changed with the 'Speaker
"TUNER"
"CD"
"CD CH"/"CD2"
"TV"
"AUX"
Speaker Setting
"STANDBY"
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting
switches as shown below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Press the [SW] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it's ON, "Sub-W ON" is displayed.
Display
"Flat"
• You can control this function when 'Switching preout'
"User"
"Rock"
"Pops"
"Easy"
"Top40"
"Jazz"
(page 12).
Setting' (page 11).
First, select the speaker type with the Speaker setting.
Button
[2]
[3]
[4]
[5]
(page 26) is set to "SWPRE Sub-W".
Display
"OFF"
"5/4"
"69/6"
"OEM"
11
|
English
Advertisement
Table of Contents
