SL-DZ1200PP / SL-DZ1200EB / SL-DZ1200EG / SL-DZ1200EP / SL-DZ1200GN
8 Operation Checks and
Component Replacement
Procedures
· This section describes procedures for checking the
operation of the major printed circuit boards and replacing
the main components.
· For reassembly after operation checks or replacement,
reverse the respective procedures. Special reassembly
procedures are described only when required.
8.1.
Checking for the control panel
(1) P.C.B. and control panel (2)
P.C.B..
· Check the control panel (1) P.C.B. and control panel (2)
P.C.B. as shown below.
8.2.
Checking for the main P.C.B.
· Follow the (Step 1) - (Step 3) of item 8.1.
· Check the main P.C.B. (A side) as shown below.
· Check the main P.C.B. (B side) as shown below.
8.3.
Checking for the jack P.C.B.
· Follow the (Step 1) - (Step 3) of item 8.1.
10