Connections; Connecting With A Hub (Not Included); Connecting The M7(S) To Your Network With A Hub (Not Included) - Samsung WAM750 User Manual

Connections

Connecting with a HUB (Not Included)

A
If the M7 fails to connect to your network or its network connection operates
•
abnormally, place the M7 closer to the HUB or your router and try again.
The M7 is a wireless network device. Its communications with your network
•
may be disrupted because of the distance between it and other devices on the
network, obstructions, or interference from other wireless devices.

Connecting the M7(s) to your Network with a HUB (Not Included)

❚
Wireless Router
Connect a LAN cable to the router and the
1
the HUB.
NOTE
You can connect the LAN cable to any
9
Attach the HUB s power cord to the power port on the rear of the HUB, and
2
then plug the power cord into an electrical outlet.
The power (
3
When the pairing indicator (
The pairing indicator on the M7 starts to flash.
If the HUB s pairing indicator does not flash, press the
rear of the HUB.
NOTE
If you are adding multiple M7s, connect all the M7 s to electrical outlets. If you are not
9
connecting all the M7s, refer to pages 40~42.
Wait until the pairing indicator on the M7 stops flashing. If the M7's LED
4
indicator turns solid blue, pairing is complete. The M7 may also beep.
HUB
LAN Plug In
) and the HUB (
) begins to flash, plug the M7(s) into an outlet.
POWER
ETHERNET SWITCH
ETHERNET SWITCH
) indicators on the HUB s front turn on.
Press here
Plug In
on the back of
Port on the HUB.
SPK Add
button on the
23
44 44