Additional Information
A
About NFC
❚
NFC tagging to establish a Bluetooth connection will not work while the product is
•
being powered on and off.
NFC tagging to establish a Bluetooth connection will not work while the battery
•
indicator on the Bluetooth device is blinking.
About the Network Connection
❚
Depending on the wireless router used, some network operations may perform
•
differently.
For detailed information on networking with a wireless router or modem, refer to the
•
router s or modem s documentation.
Select one wireless channel that is not used currently. If the selected channel is
•
used by another communication device nearby, radio interference may result in
communication failure.
In compliance with the newest Wi-Fi certification specifications, the HUB does not
•
support WEP, TKIP, or TKIP-AES (WPA2 Mixed) security encryption in networks
running in the 802.11n mode.
By its nature, wireless LAN may experience radio interference depending on the
•
environmental conditions (such as wireless router performance, distance, obstruction,
interference with other wireless devices, etc.)
WEP encryption does not work with WPS (PBC) / WPS (PIN).
•
Compatible products
❚
Mobile : Android 2.3.3 (Gingerbread) or above
•
NOTE
Some devices may not be compatible with the product.
9
Copyright
A
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user s manual may be reproduced or copied
without the prior written permission of Samsung Electronics Co.,Ltd.
7
44