Separating the cover-stand
❚
Locate the Cover-Stand s handle. See
1
the diagram on the right.
Push the Cover-Stand's handle while
2
applying force to the Cover-Stand in the
direction of the arrow.
Important : Push the Cover-Stand straight
ahead, parallel to the surface of the M7.
You may need to use some force.
The tabs release and the Cover-Stand
3
separates as shown in the figure.
NOTES
Do not lift up the M7 by the stand. It may separate from the stand and cause damage or personal
9
injury.
When installing the M7 vertically, please make sure to use the stand.
9
If you do not, vibrations from the M7's speakers may cause the M7 to tip over or fall, damaging
it.
19
44 44