Connections; Connecting The Subwoofer And Surround Speakers - Samsung HW-K950 User Manual

Hide thumbs Also See for HW-K950:
Table of Contents

Advertisement

Available languages

Available languages

ConneCTIonS

ConneCTInG THe SUBWoofer anD
SUrroUnD SPeaKerS
● Do not connect the power cord of this product or your TV to a wall outlet until all connections between
components are complete.
● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
● If the main unit is powered off, the wireless subwoofer and surround speaker will go into stand-by mode
and the STanDBy LeD on the rear will be red after blinking Blue several times.
● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar,
interference may cause some sound interruption.
● The maximum transmission distance of the wireless signal of the main unit is about 10 meters, but may
vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit
and the wireless subwoofer or surround speaker, the system may not operate at all, because the wireless
signal cannot penetrate metal.
● Wireless receiving antennas are built into the wireless subwoofer and surround speakers. Keep the units
away from water and moisture.
● for optimal listening performance, make sure that the area around the wireless subwoofer and surround
speakers location is clear of any obstructions.
Surround Speaker L
recommended Speaker Layout
Soundbar Main Unit
Subwoofer
90°
110°
tV
110°
Surround Speaker r
19
CONNECTIONS
90°

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents