HotWire RDE20.1 Quick Start Up Manual

Congratulations on the purchase of
your Hotwire Heating System.
The thermostat allows you to set the ideal room
temperature at the time you want. There are
several switching patterns available that can be
set to your specific needs. You can either rely
on the factory settings or make the settings that
suit your personal needs.
1
Set the clock
Press the TIME button
Adjust clock to current time
using the UP-DOWN button
Leave for 5 seconds to set.
2
Set day of the week
Press the WEEKDAY button
Adjust to current day of week
using the UP-DOWN button
M=1, T=2, W=3, TH=4, FR=5, SA=6, SU=7
Leave for 5 seconds to set.
3
Set heating temperature
This sets the normal temperature that
you would like your HotWire system to be
set at.
Press the SUN button
Adjust to required temperature
using the UP-DOWN button
Leave for 5 seconds to set.
Quick Start Up Guide
SIEMENS RDE20.1
SUN: NORMAL
4
Set minimum heating temperature
This setting determines the minimum temperature
you would like your floor to be.
i.e. Setting the temperature at which Hotwire will
activate.
Press the MOON button
Adjust to required temperature
using the UP-DOWN button
Leave for 5 seconds to set.
NOTE: This can be set to OFF .
Press the MOON button
Set to 5 degrees
Hold down the 'DOWN' button for 4 seconds until
the word 'OFF' appears.
5
To turn Hotwire on
If you find that you are cold and want to
turn the heating on, simply move the
slider to "Normal".
If you want to turn it off again simply
move the slider back to "Energy Saving"
UP-DOWN
SLIDER
WEEKDAY
TIME
PROGRAM
MOON: ENERGY SAVING
ENTER