HotWire HWTH1 Instructions

Turning your heating on and off Automatically
Step One: Set The Time and Day:
Press clock button, and time display will start flashing
Use the up and down buttons to adjust .Holding the
buttons down will increase or decrease the time in 15 minutes increments.
Press the OK button once the time is set.
Press the day button to get to the current Day of the week.
Press OK button to exit.
Hotwire Thermostat
Step Two: Set the thermostat to Auto mode
Ensure that the thermostat is on Auto mode.
Step Three: Programming your schedules
If you set your thermostat to 7 day programmable mode
(1). Press Prog button.
(2). Press up or down buttons to select the day you wish to start programming. then press Prog.
(hold up button to select all days of the week, to cancel, hold up button again.)
(3). Press up or down buttons to adjust the time you wish the program 1 event to commence
for the currently selected day. and then press Prog button.
(4). Press up or down buttons to set the temperature for this time period,then press Prog.
(5). Set time and temperature for the next time period. Repeat step(2) and (3) for each
time period.
(6). Press OK to save and exit.
If you set your thermostat to 5+2 day programmable mode
(1). Press Prog button.
(2). Press up or down buttons to adjust the time you wish the program 1 event to commence
for the week days( from Monday to Friday). and then press Prog button.
(3). Press up or down buttons to set the temperature for this time period,then press Prog.
(4). Set time and temperature for the next time period. Repeat step(2) and (3) for each
time period. and then press Prog button.
(5). Press up or down buttons to adjust the time you wish the program 1 event to commence
for the weekends( Saturday and Sunday). and then press Prog button.
(6). Press up or down buttons to set the temperature for this time period,then press Prog.
(7). Set time and temperature for the next time period. Repeat step(5) and (6) for each
Auto Mode.
time period.
temperature".
(8). Press OK to save and exit.
c mode. In
Key Lock & Unlock
chedules.
Press and hold
set temperature
Press and hold
* Note no program changes are possible while the unit is locked.
Temporary temperature override
In Auto mode, to temporary override the current setpoint temperature,
1. Press up or down button once, the set temperature starts flashing.
2. Press up or down button again to adjust the set temperature.
3. Press OK button to confirm the setting with OVERRIDE shown.
Now your thermostat will maintain the new set temperature until the next setpoint.
To cancel the override setting, press Del button once.
e
Resetting factory defaults
Your thermostat has the ability to reset all settings to the factory defaults. If you
rature
are certain you want to do this:
In standby mode(when thermostat is turned off), press and hold Clock button and
Day button for 5 seconds until --:-- is shown(shown for 5 seconds only)
on LCD.
wn. Any
To select Auto use the mode button
Instructions
HotwireThermostat
Model Number: HWTH1
Instructions
MO MO
to lock the thermostat. A lock icon will display.
to unlock the thermostat. The lock icon will disappear.
Button and Descriptions
1
Program button
2
3
4 Confirm button
5 Set the clock
www.theheatingcompany.co.nz
Australia
6 Set the day of the week
Verve Distribution
6 Todd St
0800 Heating (432 846)
Port Adelaide SA 5015
7
www.vervedistribution.com.au
8
9 Power button, to turn on/off the thermostat
Australia
New Zealand
Verve Distribution
The Heating Company
81 Brighton Rd
PO BOX 420
Whitianga NZ
Glenelg SA 5045
www.hotwire.co.nz
www.vervedistribution.com.au
Turning your he
Step One: Set T
Press clock butto
Use the up and do
buttons down will
Press the OK butt
Press the day but
Press OK button t
Step Two: Set
Ensure that the th
Step Three: Pro
If you set your therm
(1). Press Prog butto
(2). Press up or down
(hold up button to
(3). Press up or dow
for the currently
(4). Press up or dow
(5). Set time and tem
time period.
(6). Press OK to sav
If you set your therm
(1). Press Prog butto
(2). Press up or dow
New Zealand
for the week day
The Heating Company
(3). Press up or dow
International
PO Box 420
(4). Set time and tem
Whitianga NZ
time period. and
www.hotwire.co.nz
(5). Press up or dow
for the weekends
(6). Press up or dow