Real Time Clock; Internal Display Panel - Toshiba U840W User Manual

Real Time Clock

Problem
The BIOS setting
and system date/
time are lost.
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the
Problem
Output to screen is
garbled

Internal display panel

Apparent computer's display panel problems may be related to the
computer's setup and configuration - please refer to the
Settings
Problem
No display
User's Manual
Procedure
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and time
in the BIOS setup application by using the
following steps:
1.
2.
3.
4.
5.
Procedure
Please refer to your software's documentation to
ensure that it is not remapping the keyboard in any
way (remapping involves changing or reassigning
the function of each key).
If you are still unable to use the keyboard, you
should contact TOSHIBA Support.
section, for further information.
Procedure
Press the function keys to adjust the display
priority, and to make sure it is not set for output to
an external monitor.
Press and hold the F2 key, and then turn on
the computer. Release the F2 key one second
after the computer is power on.
Set the date in the System Date field.
Set the time in the System Time field.
Press F10 - a confirmation message will be
displayed.
Press the ENTER key - the BIOS setup
application will end and the computer will
restart.
The Keyboard section for further information.
TOSHIBA System
6-7