Footswitch And Stomp Program P1, P2 And P3 - Primova GKPX-14 User Manual

FOOTSWITCH AND STOMP PROGRAM P1, P2 and P3

The Footswitch will operate a wide range of stomp patterns. Depending on how you
prefer to use the unit there are three different programs: P1, P2 and P3.
P1 – (Factory default), this program is easy to understand and might be a good
starting point. For use at home or in a studio this might be the preferred program.
P2 – When playing guitar in a live situation a single-stomp or a double-stomp may be
the most multi-tasking effort you can afford without affecting your playing. For live
use and with many connected synth units, P2 might be the most effective program
to limit tap-dancing. However P2 may require training to comprehend.
P3 – This program is also easy to understand and allows operation similar to a US-20
unit selector. IF YOU HAVE ONLY TWO SYNTHS THIS PROGRAM MAY BE YOUR
FAVOURITE
We strongly suggest you try all programs to see which one you handle the best.
NOTE: TO SELECT BETWEEN P1, P2 or P3 YOU MUST RUN THE SETUP WIZARD.
GKPX-14 GK Parallel Box 5