Introduction; 13-Pin Connectors - Primova GKPX-14 User Manual

GKPX-14 GK Parallel Box

INTRODUCTION

The GKMX-14 stomp box allows you to connected to up to four 13-pin Guitar
Synthesizer units such as Roland GR-33, GR-55, VG-99, Boss GP-10 or other similar
13-pin devices.
The 13-pin input is compatible with Roland GC-1 or any other 13-pin GK-3, GK-2 or
GK-KIT equipped guitar.
There's only one footswitch to control the behavior of this small box.
NOTE: It is important for you to read this document in full to grasp all the available
features. It is also important that you run the Setup Wizard (see separate chapter)
to setup the box to suit your needs.

13-PIN CONNECTORS

The 13-pin connectors are soldered to the printed circuit board. Please do not use
more force or violence than required.
Connect the Guitar to the connector marked "IN" and a Guitar Synth to the output
marked "GK A". Do not turn on power until all connections are made.
NOTE: THE SYNTH CONNECTED TO "GK A" IS POWERING THE BOX.
THE BOX WILL NOT OPERATE UNTIL THE SYNTH CONNECTED TO "GK A"
IS TURNED ON.
GKPX-14 GK Parallel Box 3