Changing A Wheel; Parking The Vehicle - PEUGEOT PARTNER Tepee Handbook

Changing a wheel

CHANGING A WHEEL

1. Parking the vehicle

- the occupants must get out of the
vehicle and wait in a safe location.
- If possible, park the vehicle on
level, stable and non-slippery
ground.
- Apply the parking brake, switch
off the ignition and engage first or
reverse gear.
- Place a chock under the wheel
diagonally opposite the one to be
changed.
If the vehicle is fitted with a towbar,
it is sometimes necessary to raise
the vehicle slightly to make it easier
to remove the spare wheel from its
carrier.
On certain types of ground and/
or if considerable loads are being
transported, call a PeugeOt dealer or
a qualified workshop.
The jack and tools are specific to your
vehicle. Do not use them for other
purposes.
2. Tools
the tools are stowed in a storage area
closed by a flap under a front seat.
- If necessary, move the seat forward
to access the storage compartment
from the rear.
- Remove the flap then take out the
jack and the tool carrier.
- Remove the tools needed from the
carrier.
1. Jack.
2. Wheelbrace.
3. Chock.
4. Spanner for the Zenith roof bars
and rear lamps.
5. Allow wheel trim removal tool.
6. towing eye.