Removing The Seat - PEUGEOT PARTNER Tepee Handbook

Hide thumbs Also See for PARTNER Tepee:
Table of Contents

Advertisement

Seats

Removing the seat

-
If necessary, move the front
seats forward and lower the head
restraint.
-
Place the seat in the fully folded
position.
Refer to the "fully folded position"
described on the previous page.
-
Press the red lever to release the
front feet.
-
tilt the entire seat rearwards by
approximately 45° without releasing
the lever.
-
Release the lever.
Lift the seat vertically to the limit of
-
the anchorages.
-
Straighten the seat by tilting it
forwards then lift it.
Putting the seat back in place
-
tilt the seat forward by 45°.
-
Place the hooks between the
two bars.
-
Fold back the seat to fix the rear
anchoring points.
-
Pull the control to return the seat
back to its initial position.
-
Raise the head restraint.
Check that no object is obstructing
the anchoring recesses or preventing
correct locking of the seats.
Good practice
Following the various operations:
-
do not remove a head restraint
without storing it and fix it to a
support,
-
ensure that the passengers can
always access the seat belts and
fasten them easily,
-
passengers must never take
their seat without adjusting and
fastening their seat belt.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents