Load Space Cover (5 Seat Version) - PEUGEOT PARTNER Tepee Handbook

LOAD SPACE COVER (5 SEAT VERSION)

this rigid shelf conceals the objects
stored in the boot.
Folding
From the boot, fold the half-shelf,
raising it to detach it from the notch C.
Removing
Fold the load space cover.
Detach it from the notches A and B
pulling it towards you.
Raise it and remove the assembly.
Refitting
Place the load space cover in front
of A and B.
Push it forwards to insert the lugs in
the notches.
unfold and clip into the notches C.
Practical information
Storing (according to version)
A location is provided in the back of the
rear seats to accommodate the load
space cover folded onto itself.
Slide it vertically between the side
guides located at mid seat back height.
Insert the hinge first, with the free flaps
turned upwards.
this rigid load space cover can
form a shelf. However, for safety
reasons, do not place objects
on it which could become dangerous
projectiles in the event of sharp braking
or rear impact.
4