Advertisement
Along the upper and lower edges of the backplane are 4 power pads
providing external power supply I/O. These 4 pads facilitate input or
output of powers and grounds. Contact Advantech for installation
help.
The backplane is configured to comply with the clock routing specified
in the CompactPCI Hot Swap Specification, PICMG 2.1, version 1.0.
This Specification requires that each slot be independently clocked.
If users would like to reconfigure the backplane to comply with the
TM
earlier CompactPCI
Specification, PICMG 2.0, version 3.0, which
allows the backplane to be backward compatible with CPUs using
shared clocks, please contact Advantech for help.
Advertisement
