Switch The Device On; Charge The Battery - Nokia N95 Get Started

Switch the device on

1 Press and hold .
2 If the device asks for a (U)PIN code
or lock code, enter it, and press
The factory setting for the lock code
is 12345.
Your device has internal antennas.
Note: As with any radio transmitting device, avoid touching an
antenna unnecessarily when the antenna is in use. For example,
avoid touching the cellular antenna during a phone call. Contact
with a transmitting or receiving antenna affects the quality of
the radio communication, may cause the device to operate at a
higher power level than otherwise needed, and may reduce the
battery life.
1 Cellular antenna
2 Bluetooth technology/
wireless LAN antenna
3 GPS receiver
.

Charge the battery

1 Connect a compatible charger
to a wall outlet.
2 Connect the power cord to
the device. If the battery is
completely discharged, it
may take a while before
the charging indicator
starts scrolling.
3 When the battery is fully
charged, the charging indicator stops scrolling. Disconnect
the charger from the device, then from the wall outlet.
7