Image Setup - D-Link DCS-3112 User Manual

Configuration
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable Privacy
The Privacy Mask setting allows you to specify upto 3 rectangular areas
Mask:
on the camera's image to beblocked/excluded from recordings and
snapshots.
You may click and drag the mouse cursor over thecamera image
to draw a mask area.Right clicking on the camera image brings up
thefollowing menu options:
Disable All: Disables all mask areas
Enable All: Enables all mask areas
Reset All: Clears all mask areas.
Mirror:
Mirrors the images.
Flip:
Rotates the image 180 degrees.
White Balance:
If this option is enabled, white objects will be rendered as white on the
screen.
Exposure Mode:
Changes the exposure mode. Use the dropdown box to set the camera
for Indoor, Outdoor, or Night environments, or to capture Moving
objects. The Low_Noise option will focus on creating a high-quality
picture without noise. You can also create 3 different custom exposure
modes. The Max Gain setting will allow you to control the maximum
amount of gain to apply to brighten the picture.
Denoise:
This setting controls the amount of noise reduction that will be applied to the picture.
Brightness:
Adjust this setting to compensate for backlit subjects.
Contrast:
Adjust this setting to alter the color intensity/strength.
Saturation:
This setting controls the amount of coloration, from grayscale to fully saturated.
Sharpness:
Specify a value from 0 to 8 for image edge enhancement.
Reset Default:
Click this button to reset the image to factory default settings.
D-Link DCS-3112 User Manual

Image Setup

29