Hitachi C 6MFA Technical Data And Service Manual page 10

(7) Removing the Base Ass'y [63] (See Fig. 7.)
(a) Loosen the Seal Lock Screw (W/Sp. Washers) M6 x 14 [65], then remove Lever (A) [66], Lock Nut [67],
Washer [68] and Bolt (Square) M6 x 20 [53].
(b) Loosen the two Hex. Socket Set Screw M5 x 6 [34] of the Gear Cover Ass'y [35] and the hex. socket screw
in the Sleeve [58] to remove the Sleeve [58].
(c) Loosen Adjusting Screw (A) [64] and remove it from the Gear Cover Ass'y [35]. Then the Base Ass'y [63]
can be removed.
[64]
[63]
[58]
[67]
[68]
[66]
[65]
[35]
[34]
Fig. 7
--- 7 ---
[53]