Hitachi C 6SS Handling Instructions Manual
Hitachi c 6ss; c 7ss circular saws
Hide thumbs
Also See for C 6SS:
- Technical data and service manual (24 pages) ,
- Handling instructions manual (53 pages) ,
- Handling instructions manual (68 pages)
Table of Contents
Advertisement
Quick Links
Circular Saw
Model C 6SS
Handling instructions
Note:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure effi cient, safe operation. It is
recommended that these INSTRUCTIONS be kept readily available as
an important reference when using this power tool.
C 7SS
•
Advertisement
Table of Contents
Related Manuals for Hitachi C 6SS
Summary of Contents for Hitachi C 6SS
-
Page 1: Circular Saw
Circular Saw Model C 6SS C 7SS • Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure effi cient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as... -
Page 2: General Safety Rules
d) Remove any adjusting key or wrench before GENERAL SAFETY RULES turning the power tool on. A wrench or a key left attached to a rotating part of WARNING! the power tool may result in personal injury. Read all instructions e) Do not overreach. -
Page 3: Further Safety Instructions For All Saws
Never attempt to remove the saw from the work or SAFETY INSTRUCTIONS FOR ALL SAWS pull the saw backward while the blade is in motion or kickback may occur. DANGER: Investigate and take corrective actions to eliminate the a) Keep hands away from cutting area and the blade. cause of blade binding. -
Page 4: Specifications
7. Never use the circular saw with its lower guard fi xed in 11. For model C6SS, the saw blades range should be from the open position. 165 mm to 160 mm. 8. Ensure that the retraction mechanism of the guard For model C7SS, the saw blades range should be from system operates correctly. -
Page 5: Cutting Procedures
CAUTION CAUTION To avoid possible accident, always ensure that the It is very hazardous to allow this wing bolt to remain portion of lumber remaining after cutting is securely loosened. Always thoroughly clamp it. anchored or held in position. 3. Regulating the guide (Optional accessory) 5. -
Page 6: Maintenance And Inspection
(A), please contact protection, carbon brush inspection and replacement the shop where you purchased the Circular Saw. on this tool should ONLY be performed by a Hitachi (3) To assure proper rotation direction of the saw blade, the Authorized Service Center. - Page 7 7. Service parts list CAUTION Repair, modifi cation and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center. This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance.
- Page 12 Hitachi Koki Co., Ltd. Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99180011 F Printed in China...