Pcapdump - D-Link NetDefend DFL-210 Cli Reference Manual

2.2.44. pcapdump

ospf -ifaceup <interface> [-process=<OSPF Router Process>]
Take specified interface online.
ospf -execute={STOP | START | RESTART} [-process=<OSPF Router
Process>]
Start/stop/restart OSPF process.
Options
-area
-database
-execute={STOP | START | RE-
START}
-iface
-ifacedown
-ifaceup
-lsa
-neighbor
-process=<OSPF Router Pro-
cess>
-route
-snoop={ON | OFF}
-verbose
<interface>
<interface>
<lsaID>
<OSPF Area>
<OSPF Neighbor>
{HA | ALT}
2.2.44. pcapdump
Packet capturing.
Description
Packet capture engine
Usage
Show area information.
Show the LSA database.
Start/stop/restart OSPF process. (Admin only)
Show interface information.
Take specified interface offline. (Admin only)
Take specified interface online. (Admin only)
Show details for a specified LSA <lsaID>.
Show neighbor information.
Required if there are >1 OSPF router processes.
Show the internal OSPF process routingtable.
Show troubleshooting messages on the console.
Increase amount of information to display.
OSPF enabled interface.
OSPF enabled interface.
LSA ID.
OSPF Area.
Neighbor.
Show HA routingtable.
53
Chapter 2. Command Reference