Alg; Alg_Ftp - D-Link NetDefend DFL-210 Cli Reference Manual

3.4. ALG

3.4. ALG
This is a category that groups the following object types.

3.4.1. ALG_FTP

Description
Use an FTP Application Layer Gateway to manage FTP traffic through the system.
Properties
Name
AllowServerPassive
ServerPorts
AllowClientActive
ClientPorts
AllowUnknownCommands
AllowSITEEXEC
MaxLineLength
MaxCommandRate
Allow8BitStrings
AllowResumeTransfer
Antivirus
ScanExclude
CompressionRatio
CompressionRatioAction
ZDEnabled
ZDNetwork
FileListType
FailModeBehavior
File
Specifies a symbolic name for the ALG. (Identifier)
Allow server to use passive mode (unsafe for server). (Default:
No)
Server data ports. (Default: 1024-65535)
Allow client to use active mode (unsafe for client). (Default:
No)
Client data ports. (Default: 1024-65535)
Allow unknown commands. (Default: No)
Allow SITE EXEC. (Default: No)
Maximum line length in control channel. (Default: 256)
Maximum number of commands per second. (Default: 20)
Allow 8-bit strings in control channel. (Default: Yes)
Allow RESUME even in case of content scanning. (Default:
No)
Disabled, Audit or Protect. (Default: Disabled)
List of files to exclude from antivirus scanning. (Optional)
A compression ratio higher than this value will trigger the ac-
tion in Compression Ratio Action, a value of zero will disable
all compression checks. (Default: 20)
The action to take when high compression threshold is viol-
ated, all actions are logged. (Default: Drop)
Enable ZoneDefense Block. (Default: No)
Hosts within this network will be blocked at switches if a virus
is found.
Specifies if the file list contains files to allow or deny. (Default:
Block)
Standard behaviour on error: Allow or Deny. (Default: Deny)
List of file types to allow or deny. (Optional)
82
Chapter 3. Configuration Reference