Reset; Set; Set Property Values - D-Link NetDefend DFL-210 Cli Reference Manual

2.1.9. reset

2.1.9. reset
Reset unit configuration and/or binaries.
Description
Reset configuration or binaries to factory defaults.
Usage
reset [-configuration] [-unit]
Options
-configuration
-unit

2.1.10. set

Set property values.

Description
Set property values of configuration objects.
Specify the type of object you want to modify and the identifier, if the type has one. Set the proper-
ties of the object by writing the propertyname equals (=) and then the value. An optional category
can be specified for some object types when using tab completion.
If a mandatory property hasn't been specified or if a property has an error a list of errors will be
shown after the specified properties have been set. If an invalid property or value type is specified
the command will fail and not modify the object.
See also: add
Example 2.5. Set property values
Set properties for objects that have an identifier property:
gw-world:/> set Address IP4Address example_ip Address=1.2.3.4
Comments="This is an example"
gw-world:/> set IP4Address example_ip2 Address=2.3.4.5
Note
Requires Administrator privilege.
Reset configuration to factory default.
Reset unit to factory defaults.
Note
Requires Administrator privilege.
25
Chapter 2. Command Reference