Igmpsetting - D-Link NetDefend DFL-210 Cli Reference Manual

3.26. IGMPSetting

3.26. IGMPSetting
Description
IGMP parameters can be tuned for one, or a group of interfaces in order to match the characteristics
of a network.
Properties
Name
Interface
RobustnessVariable
MaxRequestsPerSecond
RouterVersion
LowestCompatibleVersion
QueryInterval
QueryResponseInterval
LastMemberQueryInterval
LastMemberQueryCount
StartupQueryInterval
StartupQueryCount
UnsolicatedReportInterval
ReactToOwnQueries
Comments
Specifies a symbolic name for the object. (Identifier)
The interfaces that these settings should apply to.
IGMP is robust to (Robustness Variable - 1) packet losses.
(Default: 2)
Maximum number of IGMP requests to process each second
and interface. (Default: 100)
Multiple IGMP querying routers on a network must use the
same IGMP version. (Default: IGMPv3)
The lowest IGMP version to allow on incoming requests.
(Default: IGMPv1)
The interval between general queries sent by the security
gateway. (Default: 125000)
The maximum time until a host (client) has to send an answer
to a query. (Default: 10000)
The maximum time until a host (client) has to send an answer
to a group and group-and-source specific query. (Default:
10000)
The number of group and group-and-source specific queries
sent until the security gateway decides there are no more sub-
scribers to a specific multicast group. (Default: 2)
The general query interval to use during the startup phase.
(Default: 30000)
The number of startup queries to send during the startup
phase. (Default: 2)
The time between repetitions of a host's initial membership
reports to a group. (Default: 1000)
Should the system respond to Member Report Queries orgin-
ating from itself. (Default: No)
Text describing the current object. (Optional)
118
Chapter 3. Configuration Reference