Setting The Macintosh Computer; For Mac Os X - Konica Minolta bizhub C450 Print Manual

Setting up network printing

Setting the Macintosh computer

Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.
Reminder
For network settings, consult the network administrator.
For printer driver installation, refer to "Installing the printer driver" on
page 2-1.

For Mac OS X

1
On the Apple menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the AppleTalk tab.
5
Check that the "Make AppleTalk Active" check box is selected.
6
Click the TCP/IP tab.
7
Select the items from "Configure" that correspond to the network set-
tings for the Macintosh computer that is connected to the network, and
then set the IP address and subnet mask.
8
Click the close button at the top left of the dialog box.
The "Apply configuration changes?" message appears.
9
Click the [Apply] button.
The AppleTalk and Ethernet settings are saved.
C450
3
3-33