Blaupunkt BP2914HD Instruction Manual page 7

TV Key Functions
Remote Sensor: Receives the remote signals from the remote control.
Power Switch: Please press the power switch at the Bottom right of the panel to power on the TV.
Standby: Press the STANDBY Button to turn on or off the TV.
Power Indicator: In Standby mode the LED indicator will turn red. In Power on mode the indicator will turn off. The
red LED will blink when receiving commands from the remote control.
Source: Press the SOURCE Button to display the input source list and then press Vol+/- to select the input source.
MENU: Press the MENU Button to display the Main Menu. In main Menu, you can use the Vol+/- or CH+/- Buttons
to find and select different sub menus and then press the SOURCE Button to confirm.
CH+ / CH- : Press the CH+ / CH- Buttons to scroll through the channel list.
VOL+ / VOL- : Press the VOL+ / VOL - Button to increase or decrease the volume level.
RF Input: To connect the external aerial.
HDMI Inputs: The HDMI inputs allow you to connect your HDMI cable for greater definition.
YPbPr Input: The YPbPr Input must be connected for a component connection.
AV Input: The AV Input must be connected with the yellow cable in composite connection.
AV Output: The AV Output allows you to connect the unit to external video system.
HEADPHONE Output: For private listening to the TV (BP2914HD).
VGA Input: The VGA Input allows you to connect your TV to your PC to use as a monitor.
PC Audio Input: The PC Audio Input allows you to connect your TV to your PC to use as a monitor and enable the
sound for movies etc.
USB Input: The USB Input enables you to insert your USB or Hard Disc to record live TV or to play Music, Video or
Image files. It can also be used for software upgrades.
‐ 6 ‐
-1-