Blaupunkt BP2914HD Instruction Manual page 12

3) After auto tuning, the amount of programs found and stored will be shown on the display and the first channel will
begin to play automatically.
4) To change between Digital TV (DTV) and Analog TV (ATV), press the SOURCE Button on the remote control to select
the preferred mode.
5) To change the channel in either mode, press the CH+/CH- Button or press the OK Button in TV mode to display the
Channel List. Then press the UP/DOWN Navigation Buttons to select the channel you want to watch and press the
OK Button to confirm the highlighted channel. You can also press Numeric Buttons on remote to select the channel
directly. To go back to the last channel you were watching you can press the RECALL Button on the remote control.
6) To change the source input to watch a connected accessory, press the SOURCE Button and then press the ▲or ▼
Navigation Buttons to scroll through and select the available input source.
7) To adjust the volume, press the VOL+/- Button to increase or decrease the sound level.
8) Press the MUTE Button to turn off the sound only and press it again to turn on the sound again.
9) Press the INFO Button to display the information of the channel playing. Press the Up or Down arrows to scroll up
through the information. Press the Right arrow to display the information of the next channel, and press the Left
arrow to return to the information of the current channel.
Teletext
Teletext is an information system broadcasted by certain channels which will provide detailed program information. It also
offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable
networks, satellite channels, etc.) To view the TV Teletext Menu you must be watching or in DTV mode. Below are the
basic operation regarding to Teletext.
1. Press the TEXT Button to enter the Teletext Menu. Press again to exit.
2. Press the CH+/- or Numeric Buttons to select the page you wish to view. Note: When using the Numeric Buttons
the first number should not be '0' or '9'.
3. Press the INDEX Button will open/return you to the contents page.
- 11 -