GENERAL SAFETY Read this manual thoroughly before you start using the TV. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
GENERAL SAFETY (CONT.) IMPORTANT INFORMATION • Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard • Do not tamper or change or modify the product in any way. • Only use Accessories outlined and recommended by the manufacturer. •...
Page 6
GENERAL SAFETY (CONT.) • Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire. • The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
Page 7
GENERAL SAFETY (CONT.) Please make sure upon positioning this product, the place is: • Not wet or damp and Well ventilated • Away from direct sunlight or heaters. • Away from splashes or food. • Protected from excessive dust or grease. •...
INSTALLATION Install the stand as described below, or if you want to mount it to a wall, please contact a professional installer. Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. Attaching the stand Step 1 Place a soft cushioned material on top...
Page 9
INSTALLATION (CONT.) Wall-Mounting Instructions Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. • We recommend you use a professional installer as we assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own.
CONTROLS AND CONNECTIONS Display Screen IR (infra-red) sensor Power Indicator TV Buttons In the non-menu page, you can adjust the TV channel under the program addition and subtraction; Long press the key to bring up the source, short press the move cursor; Long press to call up the menu, short press to move the cursor.
CONTROLS AND CONNECTIONS OPTICAL AUDIO L/R INPUT VIDEO INPUT (COMPOSITE) Y/PB/PR INPUT (COMPONENT) HDMI 1 (ARC) HDMI 2 HDMI 3 HDMI 4 RF (ANTENNA INPUT) 10. USB INPUT USB connection Insert a USB storage device into the USB port to record, playback of video/music/photo...
REMOTE CONTROL POWER: ON/OFF SOURCE: Select the input source NUMBER BUTTONS (0-9): Select a TV channel FAV: Enter the favourite channels list. RETURN: Return to previous channel. S-MODE: Switch the sound mode P-MODE: Switch picture mode SLEEP: Select the time in which you want to switch your TV off for when you go to sleep.
Page 13
REMOTE CONTROL (CONT.) 24. TEXT: Turn TELETEXT on or off Note: The teletext function is optional and the availability buttons depends on the model. Teletext information fully depends on the operator of the channel. 25. HOLD: Freezes the current picture in the Teletext.
REMOTE CONTROL (CONT.) Using the Remote Control • Battery should normally last for about one year. • Do not mix old and new batteries in the remote • Do not use different types of battery • If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
Getting Started TURN THE POWER ON OR OFF: • Plug the power cord into a suitable power point, • Turn on the power switch. • Press the STANDBY/ON button • When you switch on the TV for the first time, the First Time Setup menu will be displayed on the screen, as per the image below.
Basic Operations Selecting an Input Source Press the SOURCE button on the remote control, to display the input source list. • buttons to select the input source, and then press OK to confirm. • Press the • You can access connected USB drives by selecting MEDIA. •...
Media MEDIA PLAYBACK • First insert a USB Device into the TV • Press “MEDIA” on the remote control. • Use the directional arrow keys to go through folders within your USB device to access Photo’s or Movies. Press the EXIT button to return to previous page •...
Menus (CONT.) SOUND SETTINGS To access Sound settings, press the MENU button and go to Sound. Sound Mode: Standard, Music, Movie, Sports, Personal. Treble/Bass: When in Personal Mode Adjust higher-pitched sounds (Treble) and lower-pitched sounds (Bass) from 0 to 100. Balance: Select the audio output between the left and right speaker from -50 to 50.
Menus (CONT.) LOCK MENU To access LOCK settings, press the MENU button and go to Lock. Default factory password is “3758”, then you can set your own password to lock the TV. Note: if you ever forget the password, use the master password “6158”. CHANNEL LOCK Press the OK button, Press the up/down directional arrows to select channel, Press the...
Menus (CONT.) TIME SETTINGS To access TIME settings, press the MENU button and go to TIME. Clock: TV receives the data and time values from the TV broadcast signal. Time Zone: Select time zone. Sleep Timer: Select OFF, 15/30/45/60/90/120/240 minutes. No Action Auto Sleep: On/OFF Auto Standby: Select OFF/3H/4H/5H.
Menus (CONT.) SETUP SETTINGS To access Setup settings, press the MENU button and go to SETUP. HDMI CEC CEC Control: Turn on/off HDMI CEC (Consumer Electronic Control) TV Auto Power On: Enables or disables turning on the TV when the HDMI connected device is turned on.
Electronic Program Guide (EPG) EPG Guide (DTV Mode Only) • Press the EPG button on the remote control to display the above interface. • Before viewing EPG information, you have to ‘activate’ each channel for which you want to view program information. To do this, press the buttons to select a channel in the left column, then press OK to confirm.
Recording NOTE: Before you can record with this TV, make sure you have the USB you wish to use formatted as a FAT32 USB storage device. Then insert the device into your TV. Insert your USB device into the USB Port When watching Digital TV, Press the RECORD button on the remote control to start recording.
FAQS GENERAL PROBLEMS WITH TV SET PROBLEM SOLUTION No Power. Make sure power plug is inserted correctly into power outlet. No Picture. Make sure the following is connected correctly • Adjust the antenna • Move TV away from any products that may cause interference. •...
Need help?
Do you have a question about the BP5000AU6000 and is the answer not in the manual?
Questions and answers