Blaupunkt BP2914HD Instruction Manual page 22

Parental Guidance
Select 'Parental Guidance' and press the OK Button to enter the sub-Menu. In this Menu you will be able to set the program
rating and block selected rating/programs from view.
Hotel Lock
To turn on the Hotel Lock feature, you must select the Hotel Lock sub-Menu in the Lock Menu and press the OK Button to
enter. Then press the ◄ or ► Buttons to set the feature on ON or OFF. Press the OK Button to confirm.
Lock Channel: Once Lock Channel is set to on, you will be able to lock a specific channel from being viewed, scanned or
edited and can only be changed after a password has been entered.
Set Source: Once Set Source has been set to on the unit will be locked on the current source mode and a password will
need to be entered to change the TV source mode.
Channel Number: In either DTV or ATV mode only, you can select a channel number to be set as the TVs preset channel.
Press the ◄ or ► Buttons to select the desired channel number and it will be set as the preset channel and automatically
turn on when the TV is turned on.
Picture Lock: Once Picture Lock is set to ON the Picture settings will not be able to be adjusted without a valid password.
Key Lock: When Key Lock mode is on, all buttons including the Standby Button on the side of unit will be locked from
operation.
Max Volume: This option allows you to set the Max Volume Level.
Source Lock: This option allows you to lock specific source modes from being used (refer to the image on the next page). To
set the Source Lock option, press the OK Button in the Hotel Lock Menu to enter the Source Lock sub-Menu. Then use the
Navigation Buttons to scroll through the source options and highlight the modes you would like to change. Press the ◄ or ►
Buttons when a mode is highlighted to set the option as ON or OFF. If the option is set as ON the mode will be lock from
operation.
Please note: DTV and ATV modes can't both ON at the same time.
- 21 -