Alliance Laundry Systems TLW12C Installation & Operation Manual
Alliance Laundry Systems TLW12C Installation & Operation Manual

Alliance Laundry Systems TLW12C Installation & Operation Manual

Automatic washers metered and nonmetered

Advertisement

Para bajar una copia de estas instrucciones en
español, visite www.alliancelaundry.com.
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Automatic
Washers
Metered and Nonmetered
www.alliancelaundry.com
TLW12C
Part No. 202629ENR3
January 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TLW12C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alliance Laundry Systems TLW12C

  • Page 1 Automatic Washers Metered and Nonmetered Para bajar una copia de estas instrucciones en español, visite www.alliancelaundry.com. TLW12C Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. 202629ENR3 www.alliancelaundry.com January 2014...
  • Page 3 W022 IMPORTANT: Read the complete INSTALLATION/OPERATION INSTRUCTIONS before using the washer. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 4: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 5 Replacing Hoses................27 Filter Screens ................... 27 Reinstallation of Shipping Materials ..........27 Motor Overload Protector..............27 Troubleshooting .................. 28 Contact Information................30 Installer Checklist..............Back Cover 202629ENR3 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 6: Safety Information

    6. To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electrical power source. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 7 15. Keep your washer in good condition. Bumping or dropping the washer can damage safety features. If this occurs, have your washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 8: Installation

    TLW2051N Pilot Hole 21.56 in. (54.76 cm) 0.44 in. 25.63 in. (65.1 cm) 26 in. (66.04 cm) (1.12 cm) 28 in. (71.12 cm) TLW2050N NONMETERED MODELS TLW2050N © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 9: Before You Start

    IMPORTANT: Install dryer before washer. This allows room for attaching exhaust duct. TLW2098N TLW2098N Shipping Brace Shipping Plug Cardboard Base Figure 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 10: Step 2: Wipe Out Inside Of Washtub

    Pressure minute minute minute (psi) (liters per (liters per (liters per minute) minute) minute) 3.4 (12.9) 3.4 (12.9) 4.0 (15.1) 4.6 (17.4) 4.6 (17.4) 4.6 (17.4) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 11: Connecting Hoses

    All hoses should be checked on a monthly basis for any visible signs of deterioration. Any hose showing the signs of deterioration listed above should be replaced immediately. All hoses should be replaced every five years. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 12: Step 4: Connect Drain Hose To Drain Receptacle

    Remove the drain hose from its shipping position on the rear of the washer by unhooking the hose from the retainer clamp. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 13: Step 5: Position And Level The Washer

    Place rubber cups on all four leveling legs. Place a level on the cabinet top and check if the washer is level from side to side and front to back. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 14: Step 6: Plug In The Washer

    110/120 Volts AC (alternating current) 15 Amps. Refer to Figure 10 to determine correct polarity of the wall receptacle. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 15: Step 7: Add Water To The Washer

    NOTE: The agitator should not be removed except for service. The washtub is designed to be self- cleaning. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 16: Vending

    6. Install extension spring in bracket hole and hole in upper arm of lever. Refer to Figure 14. 7. Bend loops closed after installation. 8. Check to make sure the lever swings freely. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 17: Slide Extension Assembly - Models Starting Serial No. 1211

    NOTE: During coin slide installation, make sure activation lever is up and off the switch. Refer to Figure 16. One Star TLW2088N Figure 17 TLW2090N TLW2090N Lever Off Switch Figure 16 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 18 Refer to Figure 19. Extension Bracket and Lever Assembly Spring Installed Coin Slide Bracket - TLW2157N Letter “A” Figure 21 TLW2163N Figure 19 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 19: Models Prepped For Card Reader

    The following list is the procedure required to install 3. Plug connectors for “white/black” wire and “red/ blue” wire together. the Phillips head screw and tamper-resistant screws: © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 20 No. 8 tamper-resistant screws, Part No. 35528. 7. Remove two screws holding front panel to base of washer and install two No. 12 tamper-resistant screws, Part No. 35527. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 21: Operation

    ON LAUNDRY. Follow package directions when using bleach. W392I Figure 25 Step 3: Close Lid Washer will not operate with lid open. W395I Figure 24 W394I Figure 26 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 22: Step 4: Set Wash Temperature And Fabric/Cycle Selector

    Settings with asterisk (*) are Energy Saving Cycles. TLW2045N Figure 27 TWO SPEED PERM PRESS WASHERS DELICATE NORMAL DELICATE NORMAL PERM PRESS FABRIC SELECTOR TLW2083N TLW2083N Figure 29 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 23: Step 5: Start Washer

    W092 The washer will stop (pause) shortly before the first TLW2048N spin and final spin. Figure 31 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 24: Control Modes

    The control enters End of Cycle Mode when a cycle is complete. The IN USE LED will be off. The control will remain in this mode until the lid is opened or vend has been satisfied. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 25: Rapid Advance

    • From final spin, cycle will advance to End of Cycle Mode. • Open lid to clear End of Cycle Mode and return to Ready Mode. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 26: Operation Instructions For Mdc Washers

    ON LAUNDRY. Follow package directions when using dry bleach. W392I Figure 33 Step 3: Close Lid Washer will not operate with lid open. W395I Figure 32 H338I Figure 34 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 27: Step 4: Set Fabric Selector And Wash Temperature

    WARM, PERM PRESS/WARM or DELICATES/ digital display. COLD. Light indicates selection. FLW1920N W387I FLW1920N Figure 36 Figure 35 To Insert Card Insert card into opening. DRY1927N Figure 37 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 28: Step 6: Start Washer

    RINSE is lit at the beginning of the Rinse cycle and will remain lit until the cycle is complete. SPIN SPIN is lit for all Spin cycles. FLW1923N Figure 38 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 29: Maintenance

    If the overload protector stops motor again, remove necessary. the washer from use and call the service person to Order filter screen Part No. F270300 from the nearest correct the problem. authorized parts distributor. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 30: Troubleshooting

    Check the laundry room fuse or circuit breaker. • • The motor overload protector may have stopped the cycle. It will reset itself in two or three minutes and restart the washer automatically. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 31 “H” on the valve bracket) and cold faucet is connected to cold mixing valve (indicated with “C” on the valve bracket). • Make sure laundry room water heater is adjusted properly. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 32: Contact Information

    +1 (920) 748-3950 for the name and address of the nearest authorized parts distributor. TLW12C TLW12C Nameplate Figure 40 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 202629ENR3...
  • Page 36: Installer Checklist

    Fill COLD Hoses. TLW1988N TLW2056N TLW1988N TLW2056N CHECK CHECK   • Check • Connect Drain Hose Lid Switch. to Drain Receptacle. W294IE0A W294IE0A TLW2101N CHECK CHECK TLW2101N © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

Table of Contents