Alliance Laundry Systems Topload Washer Installation Instructions Manual
Alliance Laundry Systems Topload Washer Installation Instructions Manual

Alliance Laundry Systems Topload Washer Installation Instructions Manual

Alliance laundry systems topload washer installation instructions

Advertisement

Quick Links

Installation Instructions

for Topload Washers
Inside.....................................
Washer Dimensions...........................................................
Before You Start................................................................
Installation.........................................................................
Installer Checklist..............................................................
Date Purchased _____________________________
Model Number _____________________________
Serial Number _____________________________
Para bajar una copia de estas instrucciones en español, visite www.comlaundry.com.
Keep these instructions for future reference.
(If this machine changes ownership, this manual must accompany machine.)
2
2
3
Back Cover
www.comlaundry.com
Part No. 201958
October 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Topload Washer and is the answer not in the manual?

Questions and answers

Summary of Contents for Alliance Laundry Systems Topload Washer

  • Page 1: Installation Instructions

    Installation Instructions for Topload Washers Inside... Washer Dimensions... Before You Start... Installation... Installer Checklist... Date Purchased _____________________________ Model Number _____________________________ Serial Number _____________________________ Para bajar una copia de estas instrucciones en español, visite www.comlaundry.com. Keep these instructions for future reference. (If this machine changes ownership, this manual must accompany machine.) Back Cover www.comlaundry.com...
  • Page 2: Washer Dimensions

    Safety Glasses Wood Block Wrench Screwdriver Pliers Level Figure 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 28 in. (71.1 cm) 22.13 in. (56.2 cm) .4 in. 26 in. (66 cm) (10.2 mm) Figure 1...
  • Page 3: Installation

    Shipping Brace Shipping Plug Cardboard Base Figure 3 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 201958 Step 2: Wipe Out Inside of Washtub Prior to first wash, use an all purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside of washtub.
  • Page 4: Step 3: Connect Fill Hoses

    © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Connecting Hoses Remove the two plain rubber washers and two filter screens from the accessories bag.
  • Page 5: Standpipe Installation

    IMPORTANT: Drain receptacle must be capable of handling a minimum of 1-1/4 inch (32 cm) outside diameter drain hose. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 201958 Standpipe Installation: Place the adapter into the standpipe.
  • Page 6: Laundry Tub Installation

    Beaded Strap (tape if necessary) Standpipe Adapter Figure 9 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Laundry Tub Installation: For this type of installation, the drain hose MUST be secured to the stationary tub to prevent hose from disloding during use.
  • Page 7: Step 5: Position And Level The Washer

    Do not slide washer across floor once the leveling legs have been extended. Legs and base could become damaged. Verify that washer does not rock. Wood Block Figure 11 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 201958 Level Locknut Leveling Leg Rubber Cup...
  • Page 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT When plugging in the washer: • DO NOT overload circuits. • DO NOT use an extension cord.
  • Page 9: Grounding Information

    NOTE: The wiring diagram is located in the control hood. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 201958 Step 7: Add Water to the Washer To prevent damage to pump, do not run washer before adding at least one quart water to the tub.
  • Page 10: Step 8: Check Lid Switch

    Refer to Installer Checklist on the back cover of this manual and make sure that washer is installed correctly. Run washer through one complete cycle to make sure it is operating properly. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 201958...
  • Page 12: Installer Checklist

    (Refer to the manual for more detailed information) • Remove the Shipping Brace and Shipping Plug. CHECK • Wipe Out Inside of Washtub. CHECK Filter • Connect Fill Screens Hoses. COLD CHECK • Connect Drain Hose to Drain Receptacle. CHECK Installer Checklist Fast Track for Installing the Washer TLW1975N...

Table of Contents

Save PDF