Table of Contents
Advertisement
A2-2-2 Virtual server setup
PPPoE setup
Select PPPoE in WAN connection Type
Enter User Name and Password provided by your ISP
The router will get the IP address upon connection. In this example,
we get the IP address of 211.20.82.39.
Enter Virtual Server setup.
Enter DVR's IP (192.168.1.53) and port number (8000). Enable the
port and check both protocols of TCP and UDP. Save the settings
before leaving this page.
Once the routing table is setup, when the client software connects to
211.20.82.39 with PORT 8000, the router will forward the packets to
its matching destination, 192.168.1.53, and thus connect the client to
the DVR.
- 44 -
DVR User Guide
Advertisement
Table of Contents
