Table of Contents
Advertisement
4-7 FIRMWARE UPGRADE
4-8 FACTORY DEFAULT
4-9 LANGUAGE
The firmware can be upgraded via USB pen drive.
Enter the FIRMWARE UPGRADE menu for firmware upgrade process
through USB port.
Through USB port:
Click [CHECK USB], then click [UPGRADE].
The message "POWER OFF AND POWER ON" will be displayed
when firmware process finished. Please restart DVR by power off then
power on.
Click on ON or OFF to change the setting.
Click on DEFAULT to reload the Factory Default settings.
CHANGE FACTORY DEFAULT(For ADMIN only)
Make all settings of USB memory stick as default value.
LOAD SETUP(For ADMIN only)
Read the settings in USB memory stick.
SAVE SETUP(For ADMIN only)
Store all DVR settings into the USB memory stick.
1. The password will not be changed by " Factory Default" .
2. Running both Factory Default and FORMAT HDD process are suggested
after a new HDD installed.
LANGUAGE
Change the OSD language.
- 25 -
DVR User Guide
Advertisement
Table of Contents
