Table of Contents
Advertisement
4-4-6 TIME/DATE SETUP
1. We strongly suggest completing the following settings at the initial setup.
(1) Set up the DATE/TIME, and RUN all factory defaults.
(2) Format HDD (setup MENU - > HDD MANAGEMENT -> FORMAT )
2. DO NOT change the date and time after the recording starts. It may corrupt the DVR data archive
and causes playback error. If change date and time is required after the recording starts, please
format HDD to avoid error.
4-4-7 PASSWORD SETUP
4-4-8 BUZZER SETUP
Please set up the system date and time before the DVR starts
recording. The date and time can be adjusted by Mouse wheel.
DATE FORMAT- Asia/American/European.
TIME FORMAT- 12 hours/24 hours.
MONTH FORMAT- English/Numeric
The password consists of 1 to 8 digits. Click 0~9 icon to enter the
password. Then, click ENTER to confirm and enter the system.
[USER ID]
Display User ID.
[USER PW]
Enter the current password.
[NEW PW]
Enter the new password.
[CONFIRM PW]
Enter the new password again for confirmation.
[KEY TONE]
Turn on/off the beeping for any button is pressed.
[VIDEO LOSS]
Turn on/off the beeping for video loss warning.
[ALARM ACTIVE]
Turn on/off the beeping when alarm is triggered.
[MOTION]
Turn on/off the beeping when motion is detected.
- 20 -
DVR User Guide
Advertisement
Table of Contents
