Table of Contents
Advertisement
4-4-4 ALARM SETUP
Note:
Alarm output can be triggered by both alarm input and video loss.
Alarm output can not triggered by motion detection.
4-4-5 INTERVAL SETUP
[CHANNEL]
Select the channel to be setup.
[INPUT]
Set up the Alarm input format.
NORMAL CLOSE- when the alarm is triggered,
alarm output becomes open circuit.
NORMAL OPEN- when the alarm is triggered,
alarm output becomes close circuit.
[DURATION]
For both post-alarm recording duration and the alarm output duration.
(1~99 seconds).
[SEQUENCE SCREEN]
Interval setup for all channels sequential full screen display
(Range: 1~99 seconds)
[PIP SCREEN]
Picture in Picture, the sub-picture's sequence interval setup.
(Range: 1~99 seconds)
[EVENT UPDATE]
In order to avoid the same event (alarm, motion and video loss)
recorded from time to time, the event happens within the EVENT
UPDATE period will not be recorded.
(Range: 10~990 seconds)
- 19 -
DVR User Guide
Advertisement
Table of Contents
