Advertisement
REAR PANEL
1. Mains Input Socket
2.Power Fuse
3. Earth Connection Screw
4. DC Power Supply Terminals
5. Speaker Output Terminals
6. Aux Output (6.3 Phone Jack)
7. Tape Output (6.3 Phone Jack)
8. Aux 3 Level Control
9. Aux 3 Input (6.3 Phone Jack)
Mains Connection
The supply transformer has been designed for use on either 115Vac or 230Vac, selected by slide
switch on rear panel. The amplifier is factory set at 230Vac mains voltage.
Battery Connection (24Vdc)
When using external batteries, earth the amplifier via the screw terminal because of the high
voltages present. Electrical stability of the system is increased by earthing the case.
NOTE: the connection cable must be fitted with an in-line fuse. Quick blow type F15A when
Connecting batteries please ensure correct polarity.
10. Channel 5/Aux 2 Input (6.3 Phone Jack)
11. MIC 4/Aux 1 Selector Switch
12. Channel 4/Aux 1 Input (6.3 Phone Jack)
13. MIC 3/Phono Selector Switch
14. MIC 3/Phono Input (6.3 Phone Jack)
15. MIC 2 Input (6.3 Phone Jack)
16. MIC 1 Input (6.3 Phone Jack)
17. Mains Voltage (115V/230V) Selector Switch
18. Zone control Speaker Output Terminals
(3)
Advertisement
