Turn On Your Speaker; Pair Bluetooth Devices To Your Speaker - Uniden BTS200 Owner's Manual

Turn on Your Speaker

When you turn on your speaker for the first time, it automatically goes into pairing mode.
The Bluetooth LED (
on your speaker, it searches for already paired devices and then moves into a standby state.
1. Press and hold
2. All LEDs light and a power on tone sounds.
3. and LEDs go out.
4. flashes slowly while looking for Bluetooth devices. It remains steady on when
Bluetooth devices are discovered; otherwise, it goes out.
To turn off the speaker: Press and hold

Pair Bluetooth Devices to Your Speaker

Pair First Bluetooth Device
Pair your first Bluetooth device to your speaker when you turn your speaker on for the first
time. Be sure your speaker is in pairing mode when you pair your second Bluetooth device
(see step 1-2 of 'Pair Second Bluetooth Device' below).
1. Select a Bluetooth V2.1 or above device (mobile phone or music player) to pair.
6
) flashes rapidly and is ready to pair (see p. 7). The next time you turn
for at least 3 seconds.
for at least 3 seconds.