Set Up Your Bts150 Speaker; Charge The Battery; Turn On Your Speaker - Uniden BTS150 Owner's Manual

SET UP YOUR BTS150 SPEAKER

Charge the Battery

1. Slide the main power switch to the ON position (see page 8).
2. Insert the adapter's mini USB connection into your speaker's USB slot (see page 8).
3. Plug the adapter into your computer.
4. The LEDs flash blue while the battery is charging (charge time = 7.5 hours on a
completely empty battery). The LEDs turn solid blue when the battery is fully charged.
Charge the battery fully before using the speaker.

Turn on Your Speaker

When you turn on your speaker for the first time, it automatically goes into pairing mode.
The LEDs rapidly flash red and blue while in pairing mode. After you pair Bluetooth devices
to your speaker, the next time you turn it on it searches for these paired devices and then
moves into a standby state.
1. Slide the main power switch to the ON position.
2. Press and hold
3. The LEDs flashes blue and red slowly while looking for Bluetooth devices. It remains
steady on (blue) when Bluetooth devices are discovered; otherwise, it keeps flashing.
for at least 3 seconds. A "power on" tone sounds.
5