Uniden BTS200 Owner's Manual page 7

2. Select the Searching mode on your Bluetooth device (refer to your Bluetooth device's
owner's manual for details if necessary).
3. Your Bluetooth device should find
necessary.
4. Verify that you are connected to your speaker. The Bluetooth LED (
steady ON state when pairing is complete.
Pair Second Bluetooth Device
1. Turn on your speaker,
twice.
2. Release . The BTS200 is ready to pair.
3. Follow the same procedures for pairing your first Bluetooth device (see above).
The Bluetooth Speaker can store pairing information for two devices but only one device can be
connected at a time. To switch between paired devices, disconnect the Bluetooth connection from the
existing device (see manual for your Bluetooth device) and then connect the second device.
BTS200; select it and use 0000 for a pairing code if
and continue to press and hold
) moves to a
until your speaker beeps
7