To Select A Base - Binatone Brick 4home edition User Manual

REGISTRATION
4 When registration is complete, the display shows
Registered.
Or
If the handset has already been registered to another base, the
standby display is shown. Press Menu, scroll
and press Select.
5 Register HS
6 Bases are displayed. If necessary, scroll
you wish to register the Brick handset to and press Select.
7 If you are replacing a base that is already indicating
when you press
Yes.
8 The display shows
(default) the handset will automatically register, if the PIN has
been changed, enter the system PIN and press OK.
NOTE
If registration is not successful the first time, please repeat the
process again in case the base registration period ran out of time.
If there are already 11 handsets registered to the base,
registration will fail. You must de-register a handset before you
can register a new one.
12.2

To select a base

You can register the handset with up to 4 bases. Once registered,
you can switch between bases, for example, bases at home and
at work.
1 Press Menu, scroll
2 Scroll to
D
3 All the base numbers are displayed.
use) is shown beside the base number where the handset
(In
was previously registered to. Scroll
want and press Select.
4 The display shows
complete, the handset returns to standby mode.
43
is highlighted. Press Select.
Select the display shows
Searching Base
to Registration
D
Select Base and press Select.
Searching Base X....
Binatone Help: www.meetthebrick.com
D
or
U D
Replace Base X?
X. If the system PIN is 0000
and press Select.
or to the base you
U D
When registration is
Handset
to Registration
to a new base
In Use,
Press