Nikon eclipse e100 Instructions Manual page 44

Protection Class:
(7) Operating Environment
(8) Storage Environment
(9) Conforming Standards
(The model for 100, 110, and 120 V areas is not covered by the FCC.)
42
Model for 220, 230, 240 V AC Areas
Input voltage:
Frequency:
Voltage fluctuation:
Rated current:
Fuse rating:
Power Cord:
Class I
Room Temperature:
Relative Humidity:
Altitude:
Pollution:
Installation Category
(Overvoltage Category): Category 2
For indoor use only.
Room Temperature:
Relative Humidity:
The model for 100, 110, and 120 V areas is a UL-listed product.
The model for 220, 230, and 240 V areas satisfies the EU Low-
Voltage Directive.
The model for 220, 230, and 240 V areas satisfies the EU EMC
Directive.
Select from 220 V, 230 V or 240 V AC by relocating the
fuse holder in the AC inlet.
50 - 60 Hz
±10%
0.3 A
250 V, 0.5A, time-lag low-breaking type, 5 x 20
miniature fuse x 2
Use only the following power supply cord. Using the
wrong power cord could result in danger or fire. The
protection Class I equipment should be connected to
PE (protective earth) terminal.
Approved according to EU/EN standards, 3
conductor grounding Type H05VV-F, 3 m long
maximum, rated at 250 V AC minimum.
0˚ to 40˚C
85% Max. No condensation should form.
2000m Max.
Degree 2
-20˚ to 60˚C
90% Max. No condensation should form.