INSTALLATION MANUAL
Page 7
•
You will be asked to connect your telephone line to the modem connection and press
Register to continue
•
The VIA!dj will now attempt to dial out to the existing Internet account
•
After you register (or agree to register later), the VIA!dj will fill in the account information
and you simply need to select update.
c) Do Not Connect to the Internet
If you do not wish to register the unit or to look up album information at this time you can
select Do not connect to Internet.
CONFIGURING THE VIA!dj FOR AN ETHERNET CONNECTION
Recommended Network Configuration
When connecting the VIA!dj to a broadband connection (Cable Modem or DSL), it is highly
recommended that an Ethernet router or gateway is used in the home network. In addition to the
security benefits of the firewall protection that the router provides, the router allows multiple
devices in the home to share a single IP address from the ISP. When choosing a router for the
installation, it is easiest and preferred to use hardware that contains DHCP (Dynamic Host
Configuration Protocol) server software for dynamic IP addressing of the home's network devices.
Configuring the VIA!dj's Ethernet Settings
In order to properly configure the VIA!dj to work with a broadband connection, the following
settings have to be entered either automatically (DHCP enabled router) or manually.
•
IP Address
•
IP Mask
•
Gateway
•
IP DNS
Recommended Network Configuration
E L A N
© ELAN Home Systems 2003 • All rights reserved. 01/03
H O M E
S Y S T E M S