Telephone And Ethernet Connections; Built-In Dial-Up Modem Connections - Elan ViA! dj Installation Manual

INSTALLATION MANUAL
NOTE:
If the Z•880 Video
Controller is being
serially controlled,
there is no need to
make the IR
connections to it.
Only the VIA!dj
would need to
respond to IR
commands from the
ELAN controller.
Page 5
a. HD System—The HD IR card (HDC2060) has two IR 'ALL' ports. Using either miniature IR
emitters (ELAN IR2040) or 3.5mm 'mini-to-mini' interconnect cables (ELAN IR2043),
connect the HD IR card's 'ALL' ports to the VIA!dj and the Z•880.
b. Z•630—The Z•630 has only one IR 'ALL' port. An ELAN Dual IR Emitter (IR2042) can be
plugged into the Z•630's 'ALL' port and the emitters placed over the IR windows of
the VIA!dj and the Z•880. A second alternative would be to use a 'Y' adapter and 3.5mm
'mini-to-mini' interconnect cables (ELAN IR2043).
c. System6—SAME AS Z•630.
III.

TELEPHONE AND ETHERNET CONNECTIONS

The VIA!dj downloads CD information and cover art from the internet. In order for it to do this, the
VIA!dj must be connected to either a telephone line or a home network.

BUILT-IN DIAL-UP MODEM CONNECTIONS

(RJ11 TELEPHONE LINE JACK)
The VIA!dj is equipped with a built-in dial modem which can be connected directly to a standard
telephone line using the RJ11 Telephone Line jack.
E L A N
© ELAN Home Systems 2003 • All rights reserved. 01/03
H O M E S Y S T E M S
IMPORTANT NOTE:
If using an ELAN Z•600
Communications
Controller, HDC2050 HD
Series Telephone
Interface Card, or AVEC
AV-L2, the VIA!dj and all
other peripheral devices
that connect to the
phoneline should be
connected in front of
(before) the ELAN system.