The Full Flow Drinking Water System is intended for use in filtering potable water in homes and has not been evaluated for other uses. Model 3MFF100 is installed at the point of use and typically installed under a sink. System must be installed as specified in the installation instructions by a qualified professional.
Page 4
GETTING STARTED • Installation requires some household tools and additional plumbing components. Parts and Materials Required for 3MFF100 Undersink Installation (Included): 1. Filter Head Assembly 2. Filter Items Required (not included): • Adjustable wrench • Cordless drill • Phillips head screwdriver •...
Page 5
IMPORTANT INSTALLATION INSTRUCTIONS The following installation instructions described are based on copper plumbing with 3/8” compression fittings. Additional fittings may be required to connect to cold water supply. 1. Open faucet and turn off cold water supply to relieve pressure. 2.
Page 6
12. Align lugs of filter with head assembly and insert filter into head assembly. Turn filter to the right (clockwise) until it stops (about 1/4 turn). The filter is now installed. (See Figure 6) OUTLET 13.Turn on cold water supply valve and open faucet to flush air INLET from the system.
Page 7
LIMITED WARRANTY Limited Warranty: 3M Purification Inc. warrants this Product will be free from defects in material and manufacture for the following periods from the date of purchase: Five (5) years for the Product, except for the replacement filter car- tridge and membrane, which are warranted for one (1) year.
Need help?
Do you have a question about the 3MFF100 and is the answer not in the manual?
Questions and answers