Page 1
Installation and Operating Instructions For AP Full Flow Drinking Water System Model: 3MFF100 System tested and Certifi ed by NSF International against NSF/ANSI Standard 42 and 53 for the reduction of the claims specifi ed on the Performance Data Sheet and against CSA B483.1.
The Full Flow Drinking Water System is intended for use in fi ltering potable water in homes and has not been evaluated for other uses. Model 3MFF100 is installed at the point of use and typically installed under a sink.
Temperature 40 - 100°F (4.4 - 37.8°C) Capacity: 6,000 gallons (22,712 liters) GETTING STARTED • Installation requires some household tools and additional plumbing components. Parts and Materials Required for 3MFF100 Undersink Installation (Included): 1. Filter Head Assembly 2. Filter Items Required (not included): •...
Page 5
IMPORTANT INSTALLATION INSTRUCTIONS The following installation instructions described are based on copper plumbing with 3/8” compression fittings. Additional fittings may be required to connect to cold water supply. 1. Open faucet and turn off cold water supply to relieve pressure. 2.
12. Align lugs of filter with head assembly and insert filter into head assembly. Turn filter to the right (clockwise) until it stops (about 1/4 turn). The filter is now installed. (See Figure 6) OUTLET 13.Turn on cold water supply valve and open faucet to flush air INLET from the system.
LIMITED WARRANTY 3M Purifi cation Inc. warrants this Product will be free from defects in material and manufacture for one (1) year from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Purifi...
Need help?
Do you have a question about the 3MFF100 and is the answer not in the manual?
Questions and answers