Download Print this page

aqua-pure AP9000 Operating Instructions

Single undersink water filter system

Advertisement

Quick Links

WARRANTY
The Aqua-Pure Premium AP9000 water filter system is designed to operate at a maximum pressure of 862kPa (125psi) and at a maximum temperature
of 38°C. Cuno Pacific Pty Ltd warrants this filter system to be free from defects in material and workmanship for a period of one year from the date of
purchase(*warranty period does not apply to cartridge which is consumable). This warranty is expressly limited to the repair or replacement at our
premises of any part or parts proving defective providing the housing has been installed in accordance with our Installation Instructions all relative
plumbing codes, the installation of an approved pressure limiting device preceding the filter, and the pressure and temperature do not exceed the limits
stated herein. This warranty does not extend to mechanical damage caused during installation or use. Save insofar as they may be excluded by law, this
warranty is given in lieu of all other expressed or implied warranties or conditions and Cuno Pacific Pty Ltd shall in no event be held liable for damages
or delays caused by defects and assumes no responsibility for unauthorised repairs.
for technical assistance and product support, phone or visit our website:
1300 345 837
AS/NZS 3497:1998
Lic WMKA21119
SAI Global
www.aquapure.com.au
AP9000
single undersink water filter system
installation and operating instructions

Advertisement

loading
Need help?

Need help?

Do you have a question about the AP9000 and is the answer not in the manual?

Questions and answers

Summary of Contents for aqua-pure AP9000

  • Page 1 WARRANTY The Aqua-Pure Premium AP9000 water filter system is designed to operate at a maximum pressure of 862kPa (125psi) and at a maximum temperature of 38°C. Cuno Pacific Pty Ltd warrants this filter system to be free from defects in material and workmanship for a period of one year from the date of purchase(*warranty period does not apply to cartridge which is consumable).
  • Page 2 Allow the water to run through system for 3 minutes to flush superficial dust and fines from the If the Aqua-Pure water filter system has not been used for more than one day, you will need to flush 1 to system.
  • Page 3 (ref fig 16). Insert faucet shaft into the unit to cupboard with two of the mounting hole you have just drilled (ref fig 17). 1. Your Aqua-Pure AP9000 component identification & content check list: screws provided (ref fig 13). Remember, fig 16...
  • Page 4 11. fig 8. fig 2. min. HELPFUL HINT: If there is insufficient room in your cupboard 60mm to install the AP9000 water filter system vertically, it can safely be tilted up to 60 degrees clockwise or anti-clockwise...