Removing From The Stored Position; Placing In The Stored Position; Replacing; Adjusting The Seat Width And Depth - Invacare 9000 Jymni Pediatric Series Maintenance Manual

SECTION 11—RECLINER

Removing From the Stored Position

1. Rotate the end of the spreader bar 90° toward the opposite side frame.
2. Install threaded end of locking knob into locknut located on the opposite side frame.
Securely tighten both knobs.

Placing In the Stored Position

1. Unthread one locking knob from the side frame.
2.
Rotate detached end of the spreader bar 90
FIGURE 11.6 Storing/Replacing the Spreader Bar: Storing

Replacing

NOTE: For this procedure, refer to
FIGURE 11.7.
1. Unthread both locking knobs that
secure the spreader bar to the side
frames.
2. Remove existing spreader bar.
3. Secure new spreader bar to the side
frames with the existing locking knobs.
Securely tighten.

Adjusting the Seat Width and Depth

The seat depth and width directly relates to the stability of the recliner. Any change
may cause the recliner to decrease in stability. This procedure MUST be performed
by a qualified technician.
9000 Jymni™Pediatric Series
down toward floor.
o
Spreader
Bar
Recliner Tube
WARNING
60
Side Frame
Locking
Knobs
Side Frame
FIGURE 11.7 Storing/Replacing the
Spreader Bar: Replacing
Spreader Bar
Side Frame
Part No 1100868