Bluetooth Cannot Be Played Back - Denon Ceol RCD-N9 Owner's Manual

Contents Connections
o Bluetooth cannot be played back
Symptom
Bluetooth devices cannot
0
be connected to this unit.
0
0
0
0
NFC connection fails
0
0
0
0
The sound is cut off.
0
0
0
0
o File names on the iPod/USB memory device are not displayed properly
Symptom
The file names are not
0
displayed properly ("...",
etc.).
Front/Top
Rear panel
panel
Playback
The Bluetooth function in the Bluetooth device has not been enabled. See the Owner's Manual of the
Bluetooth device to enable the Bluetooth function.
Bring the Bluetooth device near to this unit.
The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
Turn the power of the Bluetooth device off and on again, and then try again.
Set "Network Control" to "On" and connect again.
Check the NFC settings on each Bluetooth device.
Cancel the Lock function on each Bluetooth device.
Check the NFC position on each Bluetooth device, and then move the NFC close to Q on this unit.
Set "Network Control" to "On" and connect again.
Bring the Bluetooth device near to this unit.
Remove obstructions between the Bluetooth device and this unit.
To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
devices and other Bluetooth devices.
Reconnect the Bluetooth device.
Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that
cannot be displayed are replaced with a "." (period).
Remote control unit
Settings
Cause / Solution
Cause / Solution
109 Index
Tips Appendix
Page
Page
－
－
－
－
91
－
－
62
91
－
－
－
－
－