Troubleshooting; Power Does Not Turn On / Power Is Turned Off; Led Is Flashing - Denon Ceol RCD-N9 Owner's Manual

Contents Connections

Troubleshooting

1. Are the connections correct?
2. Is the set being operated as described in the owner's manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o Power does not turn on / Power is turned off
Symptom
Power does not turn on.
0
Power automatically turns
0
off.
0
o LED is flashing
Symptom
Flashing red.
0
0
Front/Top
Rear panel
panel
Playback
Check whether the power plug is correctly inserted into the power outlet.
The sleep timer is set. Turn on the power again.
"Auto-Standby" is set. "Auto-Standby" is triggered when there is no operation for a set amount of time. To
disable "Auto-Standby", set "Auto-Standby" on the menu to "Off".
The amplifier circuit in the unit has malfunctioned. Disconnect the power and contact the repair center.
The clock is incorrect because the AC was temporarily switched off, etc. Check the network connection
and adjust the clock.
Remote control unit
Settings
Cause / Solution
Cause / Solution
101 Index
Tips Appendix
Page
Page
29
79
88
－
87